| Customization: | Available |
|---|---|
| Phase: | Single Phase |
| Type: | On-line |
|
Still deciding? Get samples of US$ 260/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Queen Star Plus Series 6K - 10K Technical Specification | |||||
| Index | Q6K Plus | Q6KL Plus | Q10K Plus | Q10KL Plus | Comments |
| Input | |||||
| Input voltage | |||||
| Rated voltage | 220VAC | ||||
| Phase | Single phase with ground | ||||
| Turn on voltage range |
(120±5~274±5)VAC | ||||
| Bypass voltage range |
(60±5~300±5)VAC | Could be adjusted by software. |
|||
| Bypass low loss | 60VAC~220VAC(default 60VAC) | ||||
| Bypass low comeback |
Low loss +5VAC | ||||
| Bypass high loss |
220VAC~300VAC(default 300VAC) | ||||
| Bypass high comeback |
High loss -5VAC | ||||
| Line low loss /comeback |
(120±5) VAC /(140±5) VAC | load≤50% | |||
| (150±5) VAC /(165±5) VAC | 50% | ||||
| (160±5) VAC /(175±5) VAC | 80% | ||||
| Line high loss /comeback |
(274±5)VAC/(260±5)VAC | ||||
| Input frequency | |||||
| Rated frequency | 50Hz | ||||
| Frequency low loss |
(40~49) ±0.2Hz(default:46Hz) | Could be adjusted by software. |
|||
| Frequency low comeback |
Frequency low loss +0.5Hz | ||||
| Frequency high loss |
(51~60)±0.2Hz(default:54Hz) | ||||
| Frequency high comeback |
Frequency high loss -0.5Hz | ||||
| Input power factor | |||||
| Input power factor | > 0.99 | Q6K Plus & Q6KL Plus: 220VAC, full R load Q10K Plus & Q10KL Plus: full R load |
|||
| Generator | Support generator input | Generator rating ≥2*UPS rating |
|||
| Input current | |||||
| Rated current | 25A | 27A | 41A | 43A | |
| Input THDI | 10% | ||||
| Output protection | |||||
| Rating protection |
32A Breaker | 50A Breaker | |||
| Output power | |||||
| VA/watt | 6000/4800 | 10000/8000 | |||
| Rated voltage | 220VAC | Pure Sine wave | |||
| Voltage range | 200/208/220/230/240VAC | Q6K Plus & Q6KL Plus: Could be adjusted by software. 10% derating for 208VAC/200VAC. |
|||
| Voltage regulation | ±1% | ||||
| Voltage distortion | ≤6% | Full RCD load | |||
| ≤2% | Full R load | ||||
| DC offset | ≤200mV | ||||
| Transient response | ≤9% | R load 0%~100%~0% | |||
| ≤6% | R load 20%~100%~20% | ||||
| Transient recovery | ≤60ms voltage recovery to 90% | Full RCD load | |||
| Bypass output before turn-on |
YES | ||||
| Crest ration | 3:1 | ||||
| Output frequency range | |||||
| Normal mode | 1,Same as input frequency(46Hz~54Hz) 2,50Hz(Input frequency>54Hz or Input frequency<46Hz) |
||||
| Battery mode | (50+0.1) Hz | ||||
| Slew rate | 1 Hz/Sec | ||||
| Efficiency | |||||
| Normal mode | > 93% | ||||
| Battery mode | > 91% | ||||
| Overload | |||||
| Normal mode /battery mode |
Overload warning only | 105%±5%≤load | |||
| 1min,then transfer to bypass and alarm. | 105%±5%<load≤125%±5% | ||||
| 30S,then transfer to bypass and alarm. | 125%±5%<load≤135%±5% | ||||
| 100mS, then transfer to bypass and alarm. | load>135%±5% | ||||
| Automatically retransfer |
YES | ||||
| Short protection | |||||
| Normal /battery mode |
YES | ||||
| Transfer time | 0mS | ||||
| Battery and charger | |||||
| Battery | |||||
| Rated voltage | 192VDC | ||||
| Type/Rating | Sunshine 7AH/12V | Sunshine 9AH/12V | |||
| Battery quantity | 16 PCS | 16 PCS | |||
| Backup time | > 14min | >8min | Half load | ||
| Protection | |||||
| Low alarm voltage comeback voltage |
(180.8V±4V)/ (188.8V±4V) | ||||
| Shutdown voltage/ comeback voltage |
(176V±4V)/ (184V±4V) | (176V±4V)/ (184V±4V) | (176V±4V)/ (184V±4V) | (176V±4V)/ (184V±4V) | Load < 1000W |
| (152V±4V)/ (160V±4V) | (160V±4V)/ (168V±4V) | (152V±4V)/ (160V±4V) | (160V±4V)/ (168V±4V) | Load>= 1000W | |
| DC protection | |||||
| Overcharge protection comeback voltage |
(249.6V±4V) / (216V±4V) | ||||
| Leakage current | < 500uA | ||||
| Over discharge protection |
14.5h | Could be set by software |
|||
| Battery test | |||||
| Battery weak | YES | ||||
| Battery fault | YES | ||||
| Charger | |||||
| Output voltage | (219.2±3)VDC | ||||
| Charge time | 7 hours to 90% capacity | ||||
| Charge current | 1A | 5.5A | 1A | 5.5A | |
| Interface | |||||
| Alarm silence | YES | ||||
| DC power turn-on | YES | ||||
| Automatically retransfer |
YES | ||||
| Environment | |||||
| Work temperature |
0ºC~40ºC | ||||
| Altitude | <1000m | ||||
| Audible noise | ≤55dB | ≤60dB | |||
| Storage temperature |
-15ºC~45ºC | ||||
| Work humidity | 20%~95% | ||||
| Outline dimension and net weight | |||||
| L*W*H(mm) | 533*260*560 | 425*190*328 | 533*260*560 | 533*260*501 | |
| Net weight (Kg) |
55kg | 12.2kg | 62kg | 21kg | |
Shenzhen UPSEN Electronic CO., Ltd. locates in south of China, Shenzhen City, close to Pearl of the Orient HK, with beautiful environment and convenient transport.
We are a private high-tech enterprise integrating researching & development, production & operation and technical services as a whole, which is specialized in Electric, Electronic and Energy fields for a long time. Our main products are UPS Power, Inverter Power, Battery Power, Solar&Wind Power. We are dedicated to offer quality power and power solution for Data-center,Telecom, Bank, Hospital, Transportation, Industry, Security, and civil & office area etc. Moreover, we have mastered the core technology of power products through our independent research, we are one of few domestic enterprises which can meet the customers'customized requirements, and provide professional power solutions.
We already past ISO9001 international quality system certification, and established a complete quality system ranging from material source, process, assembling to testing. All our products are with CE Certificate, which exported to more than 30 countries and areas, like Australia, Europe, Africa, North America, South America, the Middle East, central Asia, southeast Asia etc.
We will always offer excellent quality and products to customers. Hope to make Integrity and Double-Win business with you, and to be your professional power supplier and solve your any power problems.We are sure UPSEN can achieve more successes with our efforts and your support.
Q1. What is packing?
A: Generally, we pack our goods in neutral white boxes and brown cartons. If you have legally registered patent,
We can pack the goods in your branded boxes after getting your authorization letters.
Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages before you pay the balance.
Q3. What is your terms of delivery?
A: EXW, FOB, CFR, CIF, DDU.
Q4. How about your delivery time?
A: Generally, it will take 7-20 days after receiving your advance payment.
The specific delivery time depends on the items and the quantity of your order.
Q5. Can you OEM and ODM Service?
A: Yes, we can provide free OEM Service, and ODM Service is available for volume order too.
Q6. Do you test all your goods before delivery?
A: Yes, all our products have more than 6~8 hours for againg, and strict test before dispatch
Q7. Do you have any MOQ limit?
A: Low MOQ, 5 pieces for sample checking is available.
Q8. Can I have a sample order?
A: Yes, sample order is acceptable to test and check quality for the first cooperation
Q9. How to proceed with an order?
A: Initially, let us know your requirements or application. Besides, We quote according to your requirements or our suggestions.
Thirdly, customers confirm the samples and places deposit for formal order. Finally, We arrange production.
){kind=link}