Model |
MS150K |
Components |
Description(value) |
Output |
Output power capacity |
150 KWatts / 150KVA |
Max Scalable and Configurable Power (Watts) |
300 KWatts / 300KVA |
Nominal Output Voltage |
380v/400v/415 V 3PH |
Output Voltage Distortion |
Less than 1% |
Output Frequency (sync to mains) |
50 Hz, 60 Hz |
Output Frequency (not synced) |
60Hz +/- 0.1% for 60Hz nominal, 50Hz +/- 0.1% for 50Hz nominal |
Other Output Voltages |
415 |
Topology |
Double Conversion Online |
Waveform type |
Sine wave |
Overload Operation |
10 minutes @ 125% and 60 seconds @ 150% |
Output Voltage THD |
< 1% linear load and <3% non-linear load |
Output Voltage Tolerance |
+/-1% static and +/- 5% at 100% load step |
Transfer Time |
2ms typical |
Bypass |
Built-in Maintenance Bypass, Built-in Static Bypass |
Input |
Nominal Input Voltage |
400V 3PH , 480V 3PH |
Input frequency |
50 - 60 Hz |
Input Connections |
Hard Wire 4-wire (3PH + G), Hard Wire 5-wire (3PH + N + G) |
Input voltage range for main Operations |
340 - 460 (400V), 408 - 552 (480)V |
Input Total Harmonic Distortion |
Less than 3% for full load |
Type of Input Protection Required |
3-pole breaker |
Other Input Voltages |
415 |
Maximum Short Circuit Withstand |
50.0kAmps |
Input Power Factor at Full Load |
0.99 |
Batteries & Runtime |
Battery type |
VRLA/AGM/GEL |
Typical recharge time |
6 hours to 80% capacity |
Battery Voltage |
382~480Vdc adjustable |
Extendable Run Time |
Depends on external battery bank |
Extended Run Options |
150KW-Scalable-to-250KW |
Efficiency in Battery Operation |
0.97 |
Overload Operation |
30 MINUTES AT 90% LOAD AND 20 MINUTES ON FULL LOAD |
Runtime |
30 MINUTES AT 90% LOAD AND 20 MINUTES ON FULL LOAD |
Efficiency |
95% |
Communications & Management |
Interface Port(s) |
RS232,RS485IP 20, Generator interface |
Pre-Installed SmartSlot™ Cards |
SNMP CARD, EPO |
Control panel |
LCD+LED TOUCH SCREEN AND KEYBORD |
*Product specifications are subject to change without further notice |